Automated Rig Technologies Ltd. Secures Investment to Automate Workover Rigs in the Bakken Utilizing Innovative Hands-Free Mechanized Equipment to Improve Safety and Operational Efficiency
Sucker Rod Makeup Procedure
The purpose of proper rod makeup is to create stress in the pin that exceeds the stress that will be induced in the pin by the cyclical motion of the rods as they move up and down in the well.
Attract ESG Investment OFS
Attract ESG Investment to your OFS company, reduce emissions, reduce risk, increase your efficiency, and increase your bottom line.
Achieving Circumferential Displacement Consistently
The industry has realized is that current technologies to connect oil well sucker rods using commercially available rods tongs do not achieve a reliable and consistent connection between rods and couplings that are published by sucker rod manufacturers without repetitive human verification
What is a Hydraulic Completion Unit?
A Hydraulic Completion Unit (or HCU) consists of a Snubbing Unit, Stripping RAMS, and a Primary BOP. The Snubbing Unit contains 2 sets of slips, a stationary and a traveling set, and transfers the load between stationary and traveling slips which allows the operator to run in the hole (RIH) or pull out of the hole (POOH) under pressure.
What is Continuous Sucker Rod?
Continuous Rod is a length of sucker rod that has been built at a continuous rod plant or distribution facility and has a pin end installed on each end of the rod and then coiled onto a reel.
How do we properly make up sucker rod connections?
Often industries develop the proper tool for a particular task. In the case of sucker rod make up the industry took from existing technologies and the “sucker rod tong” was born.
How do we break spray metal sucker rod couplings?
The ongoing challenge for the industry related to premature rod failures due to improperly made up connections has caused the service rigs that are completing the rod installations to over-torque sucker rod connections.
Sucker Rod Coupling Removal
Sucker Rod Coupling Removal can be cumbersome, slow, and costly.
Jointed Pipe Injector Technology, Disruptive Tech
The jointed pipe injector is the step change the industry needs for offshore and onshore operations to reduce risk and cost.
What is a Flushby?
A Flushby or Rapid Sevice Rig (RSR®) unit is a highly mobile, lightweight, and self-contained well servicing tool.
X-250+ X-celerator Upgrade
We are excited to announce the X-250+ X-celerator Upgrade!
Continuous Rod Gripper Blocks
Continuous Rod Gripper Blocks have changed many times in the last 20 years.
How To Reduce Your Well Intervention Risks By 80%
Reducing Well Intervention Costs