SERVICE RIG DRAWWORKS
|
Model Number
ART-D-100 ART-D-200 |
# of Lines
4 6 |
Max Hook Load (LBS)
100,000 200,000 |
Max Single Line Pull
25,500 36,000 |
Single line Speed (FPM)
1750 1650 |
Wire Rope
7/8", 1" 1" |
Brake
Hydraulic Caliper |
ART-D-100
|
ART-D-200
|
Service Rig Hydraulic Drawworks
Automated Rig Technologies Ltd.'s Service Rig Winch design is a high performance auto-drilling hydraulic Drawworks for use on service and workover rigs. This hydraulically driven winch offers the benefits of a compact design, and precise control typical of the "big rig" AC systems on the market today. Speeding up re-entry and workover operations.
The system includes an auto-control system that delivers fine movement and precise positional, and load control of the Hydraulic Winch system to maintain the most efficient down hole parameters for drilling, milling and reaming operations. The control routine is controlled by three modes of operation: weight on bit (WOB), rate of penetration (ROP) and differential pressure (DP). These set points are operator inputs to the control system via an HMI and have set maximum ranges to protect the operator from making a mistake. Output corrections are made multiple times per second, this means that the control system reads, calculates and corrects the output much quicker than any person is capable of, speeding up operations by optimizing penetration rate and extending the life of downhole tools.
Features:
- Common Industry components
- Integrated Feedback to Control System
- Single Pull Line capacity - 25,500 lbs
-Single Line Speed of 1750 FPM
- Simple Touch Screen input
- Complete Control System with Joystick Control
Benefits:
- Compact Design
- Improved weight control
- Extended life of downhole tools
- Easy to use HMI interface
- Safety interlocks & settings
Automated Rig Technologies Ltd.'s Service Rig Winch design is a high performance auto-drilling hydraulic Drawworks for use on service and workover rigs. This hydraulically driven winch offers the benefits of a compact design, and precise control typical of the "big rig" AC systems on the market today. Speeding up re-entry and workover operations.
The system includes an auto-control system that delivers fine movement and precise positional, and load control of the Hydraulic Winch system to maintain the most efficient down hole parameters for drilling, milling and reaming operations. The control routine is controlled by three modes of operation: weight on bit (WOB), rate of penetration (ROP) and differential pressure (DP). These set points are operator inputs to the control system via an HMI and have set maximum ranges to protect the operator from making a mistake. Output corrections are made multiple times per second, this means that the control system reads, calculates and corrects the output much quicker than any person is capable of, speeding up operations by optimizing penetration rate and extending the life of downhole tools.
Features:
- Common Industry components
- Integrated Feedback to Control System
- Single Pull Line capacity - 25,500 lbs
-Single Line Speed of 1750 FPM
- Simple Touch Screen input
- Complete Control System with Joystick Control
Benefits:
- Compact Design
- Improved weight control
- Extended life of downhole tools
- Easy to use HMI interface
- Safety interlocks & settings