We are now offering fully re-conditioned TMX's, RSR's and RSRX's to the marketplace. We are in the process of purchasing a number of units from the Alberta and Saskatchewan areas, bringing them into our Edmonton facility for re-conditioning. We are pouring over units with a fine toothed comb, repairing, replacing and recommissioning them onsite. Units are ready for international shipment and can be modified depending on final destination. Contact us today to discuss your requirements!
We have recently completed the design of a "Heavy" Flushby Rapid Service Rig, this unit offers all of the benefits from a Flushby with the added hookload capable of running tubing. Please take a moment to review the following presentation. Contact us today to discuss adding the "Heavy" Flushby to your fleet!
We have launched a new buy back program, for all equipment fabricated under the C-TECH Design & Mfg banner. If you are looking to sell a TMX®, RSR®, RSRX® we will send a tech to you to inspect and discuss options. We are in the process of buying back this equipment, refurbishing it and relocating this equipment around the world with a FULL Manufacturers warranty! Contact us today to discuss options!
Field reports from around the world report that gripper blocks installed in our X-Celerator® chains have been wearing prematurely and may have limited gripping force. Our inspection has revealed that the high wearing blocks are aftermarket (Jobber) parts and are manufactured from 6061 Aluminum. The jobber parts that are being used to replace the original OEM blocks during routine maintenance are wearing out prematurely.
Please be aware that this is NOT the correct material and will result in high wear and limited gripping force. Our OEM blocks are tested for high performance and manufactured from military grade Aluminum. Automated Rig Technologies purchased C-Tech in April of 2015 and has since increased efficiencies and reduced the price of these blocks by 35% and we have them in stock! Our goal is to reduce cost of ownership, increase up-time, and become your trusted support provider for all your service rig needs. Contact us today, we'd love to talk about your equipment and how to do better to support you!
If you are interested in this role please contact us at email@example.com
Local candidates only:
Contact us at firstname.lastname@example.org if you are interested!
Please review the attached job description, if interested please contact us at email@example.com.
We look forward to hearing from you.
As of today, April 15, 2015 Automated Rig Technologies, has completed the purchase of the ongoing business of C-Tech Design & Manufacturing. We are working hard to make sure this is a seamless transition and that our support exceeds your expectations. If you are in the area and would like to drop in we will still be in the same building on 84th Avenue and can be reached on the same phone number at (780) 464-3800 and all the numbers below.
C-Tech was founded by Mark Widney who currently resides on the Board of Directors with Automated Rig. On April 20th Willy Grant, who ran manufacturing up until 2 years ago will be joining our group. We look forward to the next year of growth. Our (780) 955-2556 phone number is still valid and we can be contacted via email here.
Material for the prototype CD Rod Tong is on order and scheduled to arrive for assembly by April 8, 2015. Assembly and testing will occur the same week and testing will be carried out by mid April. Check back with us as we progress! If you'd like email updates please fill out your info below.